Electrical projects require expertise and concentration to ensure safety and success. In addition to know-how, you need to use the right materials to get the job done. Understanding the differences between various types of conduit fittings, also known as electrical fittings, allows you choose supplies for your project with confidence. Read this guide to learn about conduit fittings such as adapters, bushings, couplings, elbows, straps and other connectors.

Types of Conduit Fittings: Bushings

The raceways (threads) on metal conduits may have sharp edges after being cut. To protect wires, all raceways must be reamed before installing a fitting. All raceways with 4 AWG wires installed require a bushing to be installed on the end. To install a bushing on any raceway, make sure it is listed.

Types of Conduit Fittings: Couplings

Couplings join materials of the same type together to form a longer straight line of conduit. Three main types of couple fittings are available:

• Metallic couplings are for metallic conduit. You secure them with set screws or via compression.

• Threaded couplings screw onto couplings that have threaded ends.

• Nonmetallic couplings are for nonmetallic conduit and are usually attached with solvent cement.

• Make sure couplings are listed for the raceway.

‍

Types ofConduit Fittings: Elbows

Similarto couplings, elbow fittings join like with like. The difference is that elbow couplings introduce a gentle curve to the length of conduit. Pulling wire through an elbow coupling is often easier than trying to thread wires through a sharp 90-degree right angle.

‍

Types of Conduit Fittings: Straps

A conduit strap secures a length of conduit to a wall ora joist. Using one helps reduce sagging that can cause conduit to break. Many straps have an arch that fits around the conduit. One or two holes may bepre-drilled into the strap to simplify mounting.

‍

Types of Conduit Fittings: Connectors

Connector fittings live up to their name by connecting components of an electrical system. Make sure connectors are listed for the raceway. You may use them to:

• Join two runs of conduit
• Connect conduit to an outlet box
• Connect conduit to a load center
• Connect conduit to another type of device

‍

Types of Conduit Fittings: Specialty Conduit Fittings

Some projects may involve the use ofspecialty conduit fittings, such as:

• Weatherheads are a waterproof cap installed outside of your home to provide access to wiring for maintenance and repairs.
• Reducer couplings allow you to connect two conduits of varying size.
• Offset couplings are used for wiring devices that may be pushed or pulled. The couplings help to ensure that energy flow remains stable even when the surrounding shaft becomes displaced.
• Rigid conduit locknuts have internal threads, allowing them to lock in place more securely.
• Hangers, clips and clamps hold up and secure conduits

‍

Choosing Conduit Fittings

Application type plays a large role indetermining what type of conduit fittings you need. Common application typesinclude:

• EMT, or electrical metallic tubing, is metallic conduit with thin metal walls. Normally, EMT is used indoors. For outdoor areas, you'll need to use compression fittings.
• RMC, or rigid metallic conduit, has much thicker walls than EMT. The thickness increases strength, making it better able to withstand harsh conditions, such as temperature extremes.
• ENT, or electrical non-metallic tubing, has thin walls like EMT, but is made of a material other than metal, like polyvinyl chloride (PVC).
• RNC or rigid non-metallic tubing is non-metallic tubing with thicker walls. It is the non-metal alternative to RMC. Due to its strength, PVC tubing is often used to make RNC.
• Liquid tight conduit has an outer, nonmetallic jacket that seals out water and resists UV damage when exposed to sunlight.
• Flex conduit is made out of flexible material. This type of conduit makes it easy to run conduit with many curves and bends.

‍

Certain conduit fittings may be required atvarious points in an electrical system for grounding or service access.

Tip: Consult local building and electrical codes when considering applications. Regulations may require you to usespecific types of conduit fittings. A permit may also be necessary to beginwork.

‍